Ogis Home Page  
 
Tube Bending & Pipe Bending
Bending Of Mild Steel Rod
Powdercoated Fabricated Mild Steel Grab Rails
Square Tube Bending, Fabrication, Welding & Powdercoating
Round Tube Bending & Welding of Chrome Plated Component
 

Bending Processes include:

Mandrel Tube Bending

Provides a uniform, deformation-free bend for use with tube and pipe.

Press Bending

Available for use where a mandrel cannot be used.

Rolling

Eliminates the need for tooling or dies and allows for greater diameter bends and spirals to be created.

Products suitable for bending include:

  • Round tube ERW and Pipe
  • Square tube ERW and RHS
  • Decorative partitioning
  • Oval tube
  • Angle
  • Rod
  • Flat bar
  • Wire
  • Bar

Materials suitable for bending include:

Mild Steel, Stainless Steel, Aluminium, Brass, Galvanised pipe or Copper tube.

Sizes commence from 8mm diameter.

While you design your products, please take our existing tooling into consideration. This information is outlined in the tables below.

Tube - Mandrel Bender Dies and Tooling

Tube Type Tube
(Dia. / Size)
(mm)		 Radius CLR
(Set-up cost apply)
(mm)
12.7 20, 31.75, 45
14.29 20
15.88 20, 31.75, 50, 75
19 40, 47.5, 53, 56, 62, 75, 105
22.2 44.5, 45, 70, 159
25.4 40, 50, 63.5, 69, 82, 82.5, 125, 210, 275
28.6 76, 89
31.8 50, 63.5, 76, 80, 101, 245
38.1 63.5, 76, 95
50.8 76.2, 300, 150
63.5 95
76.2 114
19 x 19 40, 57, 76.5, 81, 200
25.4 x 25.4 52.5, 73, 87, 88, 94, 210
30x30 135
31.8 x 31.8 60
flat oval 31.8 x 16 65
flat oval 16 x 31.8 60

Pipe - Mandrel Bender Dies and Tooling

Tube Type Tube
(Dia. / Size)
NB (mm)		 Radius CLR
(Set-up cost apply)
(mm)
8NB (13.5) 100
10NB (17.2) 50, 75
15NB (21.3) 45, 75
20NB (26.9) 90
25NB (33.7) 50, 150, 75
32NB (42.4) 63, 300, 150
40NB (48.3) 57, 150
50NB (60.3) 95, 150, 300
65NB (76.1) 150, 250
80NB (88.9) 225, 153

New tooling can be manufactured as required to suit your product design.

Click here to download the Tube Bending brochure